| Applications: |
Semi-finished
tool, through the brazing or welding on of diamond segments, equipped
for the manufacture of:
- Blocks and
slabs from natural stone (marble, gneiss, granite, sandstone,
etc.)
- Concrete
wall sections (also reinforced) and refined concrete
- Joints in
construction and tarmac (asphalt).
- Cuts in construction
materials.
|
 |
| Sawing
machine: |
Stationary
block saw such as Alpe, Hensel, Löffler, Park, Spielvogel, etc.
Multi-blade saws such as Gisbert, Makron, Pedrini, Simec, Wuuhersin,
etc.
Wall saws, table saws, joint cutters, portable saws, such as Cedima,
Deudiam, Eurodima, Gölz, Hydrostress, Lissmac, Longyear, Partner,
etc. |
|
Supporting
disc for
Diamond Circular Saw
Blade specificationes:
|
Material:
- 1.2003
Chromium steel = Standard material for supporting discs
to be brazed
- 1.7218
LWQ (laser welding quality) = Standard material for supporting
discs to be laser welded, with carbon content < 0,30%
|
|
Heat
treatment:
- Hardened
and tempered all over (=Standard)
|
Finish
of side faces and circumference:
- Surface
ground finish (wider segments which are added later guarantee
a good clearance).
- Outer
diameter ground for lowest tolerances.
- Center
bore honed or ground to H7 fitting.
|
Toothforms
(acc. to FEPA):
- C1:
wide slot
- C2:
C2: narrow slot
- C3:
narrow slot, keyhole
- C4:
narrow slot (fewer slots = longer segments than C2)
- C5:
narrow slot, keyhole (fewer slots = longer segments than
C3)
- Double
tooth, wide slot, with alternate slot depth (for short segments)
- Chamfered
segment, to protect the supporting disc when cutting abrasive
material (3 - 5 pieces on circumference, straight or with
radius)
- Hammer
segment, to protect the supporting disc when cutting abrasive
material
(3 - 5 pieces on circumference, for brazing on tungsten
carbide plates)
Special forms
on request. |
Special
characteristics:
- Straightening
acc. to FEPA standard or customer´s requirements.
- Tensioning
to customer´s specifications, to avoid re-tensioning
after brazing/welding of segments.
- Stable
tensioning level, to facilitate frequent retipping without
major re-straightening and re-tensioning.
|
Noise
reducing options:
- sandwich
type
- laser
slots.
|
|
 |
|
|
|
